Menu

Extract

PolyScience MX -20C to 135C 7L Low Profile Recirculating Chiller

Common Specifications

Working Temperature Range °F

-4° to 275°

Working Temperature Range °C

-20° to 135°

Nominal Cooling Capacity @ +20C (W)

200

Reservoir Capacity (gallons)

1.85

Reservoir Capacity (liters)

7

Reservoir/Tank Material

Stainless Steel

Reservoir Cover

Included

DuraTop

Yes

LidDock

Yes

Cleanable Air Filter

Yes

Working Access (L x W x D) (inches)

6.18 x 5.59 x 5 in

Working Access (L x W x D) (cm)

PolyScience MX -20°C to 135°C 7L Capacity Recirculating Chiller

PolyScience Refrigerated Circulating Baths are capable of reaching temperatures as low as -40°C. They provide dependable temperature control for a wide variety of laboratory coling applications.
Features

Working temperatures from -40° to +200°C

Temperature stabilities to ±0.005°C

Capacities from 7 to 75 liters

Si x controller types with large, intuitive displays and multiple communication options

Large bath openings and easy to clean surfaces

Swivel 180™ Rotating Controllers

LidDock™ Lid Stowing System

PolyScience MX 7 Liter 135°C Max Heated Circulator

Common Specifications

Working Temperature Range °F

Ambient + 20° to 275°

Working Temperature Range °C

Ambient +10° to 135°

Reservoir Capacity (gallons)

1.85

Reservoir Capacity (liters)

7

Reservoir/Tank Material

Stainless Steel

Reservoir Cover

Included

DuraTop

Yes

LidDock

Yes

Working Access (L x W x D) (inches)

6.18 x 5.59 x 5 in

Working Access (L x W x D) (cm)

15.7 x 14.2 x 12.7 cm

Temperature Stability °F

±0.13°

PolyScience IP-60 -60°C Cooler with 1.5" Rigid Coil Probe - 120V

Key Specifications:

Working Temperature: -60 to -20C

Temperature Control: Fixed at -60C

 

Key Features:

Continuous cooling to temperatures as low as -100C

Designed to run at maximum cooling

An economic alternative to dry ice or liquid nitrogen

Excellent for trapping applications, freeze drying, and rapidly cooling small volumes of liquids

 

Common Specifications:

Working Temperature Range F: -76 to -4

Working Temperature Range C: -60 to -20

Temperature Control F: Fixed at -76

Ai 10°C to 25°C 117L/Min 280L Capacity Recirculating Chiller

WAC-15 digital temperature controlled recirculating water chiller with built-in swivel casters, recommended for our IH series induction heaters (see models below). These chillers have built-in stainless steel tank, water pump and tubing for durability and rust-free operations. Water manifold included for immediate use.

Specifications

 Model
 WAC-15

 Controller Digital micro-chip controlled with LCD screen and fluid level display

 Input power 480VAC 60Hz three-phase, 16.5kW

 Nominal cooling capacity

Ai 10°C to 25°C 33L/Min 35L Capacity Recirculating Chiller

Digital temperature controlled recirculating water chiller with built-in swivel casters, recommended for our IH series induction heaters. These chillers have built-in stainless steel tank, water pump and tubing for durability and rust-free operations. Water manifold included for immediate use.

Specifications

 Model
 WAC-4

 Controller Digital micro-chip controlled with LCD screen and fluid level display

 Input power 480VAC 60Hz three-phase (3PH) 3.75kW

 Nominal cooling capacity 10366 kcal per hour

Ai 10°C to 25°C 33L/Min 17L Capacity Recirculating Chiller

Ai WAC-1 digital temperature controlled recirculating water chiller with built-in swivel casters, recommended for our IH series induction heaters. These chillers have built-in stainless steel tank and water pump for durability and rust-free operation. two sets of water manifolds included for immediate use.

Specifications

 Model
 WAC-1

 Input power 110 VAC 60 Hz single-phase (1PH) 1460 watts

 Nominal cooling capacity 1935 kcal/h

Ai -80°C 10L Recirculating Chiller with 30L/Min Centrifugal Pump

The re-designed Ai C80-10 series recirculating chillers are the true thermostatic control laboratory chiller, these closed laboratory chillers are ideal for applications such as cooling rotary evaporators, analytical instrumentation, laser etching, ICP, vacuum systems, plasma etching and jacketed reactors. This system can also be used as a replacement to tap water cooling in laboratory applications.

Ai -30°C 40L Recirculating Chiller with 30L/Min Centrifugal Pump

Ai C30-40 series recirculating chillers are the true thermostatic control laboratory chiller, these closed laboratory chillers are ideal for applications such as cooling rotary evaporators, analytical instrumentation, laser etching, ICP, vacuum systems, plasma etching and jacketed reactors. This system can also be used as a replacement to tap water cooling in laboratory applications.

Pages

Pages

Harvest Headquarters & Glass Gallery

Born in Humboldt

We Also Sell

 

  • Sterlitech buchner funnels, kits, flasks and filter paper
  • Parchment paper (various sizes)
  • DividerPro silicone accessories
  • Vape Carts