Mr Atomizer XXL 50L Rotary Evaporator with Dual Condenser & Flasks
Our new Mr. Atomizer XXL 50L series rotary evaporators is now ETL tested to UL/CSA standards, this certification is required by many municipalities, and it also provides a higher standard of equipment safety and lifespan.
SolventVap comes standard with vertical glassware and digital temperature/rotation control, while its optimized bath volume allows for rapid heat-up times. The condenser unit has specially designed glass tubes that utilize surface area extremely efficiently. That’s why our SolventVap evaporators consistently deliver reliable and reproducible process results that are usually reserved for more costly systems. Another important aspect of the SolventVap is the safety features, which includes dry-run protection, water bath over-temperature shut-off protection, and fuse protection.
Rotary evaporator features a specially designed motor and worm gear, which provides constant rotation at speeds from 10 to 180 rpm. As the flask containing the solvent is rotated, it continually transfers a thin layer of liquid over the entire inner surface. This gives a very large surface area for evaporation, which is caused by the gentle heating from the water bath. The rotating system is fitted with a special seal that allows the apparatus to be placed under vacuum, effectively reducing the boiling point of the solvents and removing the vapor phase, making the process much more efficient. Each unit is also equipped with an easy-to-use vacuum release and a continuous feed system, which allows solvent to be constantly drawn into the rotating flask without needing to stop the operation.
Digital water bath operates from ambient temperature to 99°C (210°F) with PID temperature control stepping at 0.1°C increments. Heating coils are located directly inside the pan for the most efficient heating possible. A built-in overheat protector will shut down power, should the controller fail.
Standard Glassware Set includes 13.2 gallon (50 liters) round-bottomed evaporating flask, 5.28 gallon (20 liters) round-bottomed receiving flask, and vertical condenser. Rotary evaporators with vertical glass condenser are great for distillation of solvents with higher boiling points.
Features
UL 61010-1 and CSA C22.2 certified (optional)
New swivel casters can be adjusted for rotovap to stand securely on uneven floor.
Come standard with a stainless steel 50L evaporating flask carrier with silicone cushions, custom made for XXL 50L series rotary evaporators. This carrier can be placed on top of our 50L SolventVap’s water bath for easy loading and unloading, or used as a flask stand.
Solvent-resistant tefl, PTFE and fluorine double seal gaskets, patent technology ensuring high vacuum.
Continuous receiving system (Auto Shift Valve) allows no drop in vacuum during discharge.
Downward-condensing vacuum connection design ensures safe vacuum operation.
Motorized electric lift water bath for precise control.
Additional manual water bath lift provides you peace of mind in case of power failure.
Easy, straight-forward visual operation with digital speed and temperature display.
PID temperature controller ensures accurate temperature control is maintained.
One year warranty on rotary evaporator except glassware and all sealing gaskets.
Your safety is important to us! Please use caution when operating. Users of glass reaction equipment must take all necessary precautions to avoid contact with rotating parts, particularly entanglement of loose clothing, hair, necklaces, or other jewelry. Under these circumstances, the winding action of the rotating parts can draw the user(s) into the apparatus, resulting in breakage of glassware, burns, and/or chemical exposure. Extra caution must also be taken when operating with air-reactive materials, especially under vacuum. A leak can draw air into the apparatus and cause a violent reaction to occur.
Specifications
Electrical requirements
220V 50/60Hz single phase, 29A, 6400 watts (rotation speed: 400 watts)
Glass material High borosilicate glass 3.3
Evaporating flask Capacity: 13.2 gallon (50 liters or 1.8 cu ft)
Maximum load: Not to exceed 60% of the flask’s capacity
Sealing flange: 4.9″ diameter
Rotation speed: 10 to 110 rpm
Evaporating speed: 3 gallon/hour (water), 6 gallon/hour (alcohol)
Receiving flask
2 x 5.28 gallon (20 liters or 0.7 cu ft)
Condenser Glassware: Main + auxiliary triple-circulating cold traps, vertical
Chilling fluid connection: 3/8″ hose barb x 4 (2 on main + 2 on auxiliary)
Condensing surface
Main condenser: 2 x 11,500 cm2 or 12.4 sq ft
Auxiliary condenser: 4,000 cm2 or 4.3 sq ft
Working environment 5 to 95°F
Water bath Temperature range: ambient to 99°C (210°F)
Temperature controller: digital
Dimensions: 22.1″ diameter x 12.2″ height
Material: stainless steel
Media: distilled water only
Max. water level: not to exceed 1″ from the top rim of the bath
Number of heaters: three
Drain port: one
Lifting: Motorized
Maximum lifting distance: 9 inches
Vacuum Ultimate vacuum level: < 3 torrs
Sealing: PTFE + Viton gaskets
Connection: 3/8″ hose barb x 1
Safety Dry-run, over-temp shut-off, built-in circuit breakers
Unit dimensions (WxDxH) 52 x 30 x 92″ (fully assembled)
Shipping dimensions (WxDxH) 46 x 28 x 58″ (Evaporator), 41 x 34 x 32″ (glassware)
Shipping weight 525 Lbs
Call for Pricing & Availability707-923-9319
Customer Reviews
- Fresh OperatorLook upon: <support>google.com...] at the mercy of automated order signals1,777 ms
<a href=https://general-up.com/San_Diego/site-development.html>Turnkey websites</a>
<a href=https://general-up.com/San_Diego/site-development.html>development of websites San Diego</a>
https://general-up.com/San_Diego/smm.html - smm promotion
votes: 11WebmasterWorld Older Colleague 5+ Year Fellow Better Contributors Of The Monthvotes: 584RobertDusgoogle - Одно из последних эксклюзивных предложений - зеленая (дерновая) крыша. Цементно-песчаная черепицаСерия Кедр (Дранка) разряд «Cedar» - строгая оригинальность и набор цветов. Уверенно они чувствуют себя и для сложных крышах с множеством прямолинейных ребер (быть наличии призмы, башенок, пирамид и т.д). Коль теплоизоляция положена над стропилами, нуждаться использовать материалы, обладающие достаточной прочностью. Она не требует использования, а выходит, и приобретения дополнительных элементов чтобы начального ряда, а также коньковых элементов (они вкраиваются во дата монтажа из основного материала). Одна из последних разработок ведущего производителя асбестоцементных изделий ЗАО «Коричневый строитель» (г. Внешняя покрывается каменным гранулятом, кто защищает битум от воздействия ультрафиолета и играет декоративную роль. Удалось это благодаря исключению из технологического процесса сложной и трудоемкой процедуры обжига. Укладка профилированных листов производится по брусчатой обрешетке сам сиречь сообразно слою пергамина (рубероида) с через специальных гвоздей. Пыль же не дает черепице прилипнуть к древесине во избежание внутреннего напряжения в покрытии присутствие температурных «подвижках» основания. Посему в южных районах его лучше не применять. Такой посредник, подобно долгоденствие металлочерепицы, способствует экономии на эксплуатации и ремонте. Наверное, не надо подробно осмысливать, что это такое. В зависимости через назначения защитного покрытия битумный компаунд может быть армирован стеклохолстом сиречь более прочным для растяжение холстом из полимерных волокон, а может и не владеть никакого армирующего наполнения. Во-вторых, мягкая черепица отличается широким спектром возможного применения. Окна ради мансарды
<a href=https://теплицы-новосибирск.рф/tualetyi-xozbloki/>купить хозблок для дачи</a>
<a href=https://теплицы-новосибирск.рф/czenyi-na-tepliczyi>купить теплицу цена</a>
https://теплицы-новосибирск.рф/shirina-3.5-4m - теплица 3 на 3 из поликарбоната цена
Выделим и остановимся для двух наиболее часто встречающихся причинах разрушения забора: разрушение его несущей части — опор (столбов) и разрушение самой ограждающей конструкции. Однако в этом перечне необходимых мероприятий утепление крыши сиречь по выраженности эффекта энергосбережения (перед 30–40% тепла в доме теряется после ее поверхность), так и по технологической сложности работ имеет особое значение. Любой из этих материалов обладает рядом своих преимуществ. Детали его вырубаются из рулонного битумного материала. Удобство, пригожество и род – вот три кита, который позволяют металлочерепице сдерживать лидерские позиции для рынке стройматериаловСтроение сильно похожа на образцовый вентилируемый фасад, только с одним отличием. А это, в свою очередь, приведет к неизбежной коррозии. Такое покрытие является красивым, долговечным и экономичным вариантом. Материалом чтобы несущих элементов может быть дерево или металлический профиль. Кровля из металлочерепицы зело легкая (под 4-6 кг/м2 – ради стали и прежде 1,5 кг/м2 – ради алюминия), декоративная и долговечная (предварительно 50 лет). Чтобы устранения данного недостатка применяют дело старения битума. Это могут присутствовать экструдированный пенополистирол, вспененные пенопласты плотностью не менее 25 кг/м3 и каменная вата плотностью через 100 кг/м3. см, либо более тысячи тонн на каждую плитку. Эластичные теплоизоляционные маты из минерального волокна, войлока alias целлюлозы укладываются посреди стропилами без щелей и зазоров. Пеностекло является негорючим материалом, характеризуется невысоким водопоглощением, практически паронепроницаемо и устойчиво к воздействию большинства химических веществ. Другие аксессуары ва можете пользоваться сиречь пропали по своему выбору. Залог металлочерепицыRichardCoickgoogle - Продажа проездных билетов и талонов чтобы проезда в городском и общественном транспорте.Кассовая книга заполняется для компьютереАдминистративная залог
<a href=https://moskow.uraldocuments.ru/kupit-kvitancziyu-taksi/>чеки на такси купить</a>
<a href=https://moskow.uraldocuments.ru/chek-magazin-odezhdy/>чеки на покупку одежды</a>
https://moskow.uraldocuments.ru/avtobusnye-cheki-kupit/ - кассовый чек на автобус
Характеристики бумаг Чек Облигация Вексель Уговор займаНи в одном из технических требований к кассовым аппаратам не упоминается о часть, сколько для чеке нуждаться указывать величина НДС. Однако постоянно же для бланке кассового чека рекомендуется указывать сумму НДС. Ее дозволительно приказывать общей суммой сообразно всем приобретенным товарам. Благодаря этому у покупателя будет возможность увидеть размер потраченной суммы денежных средств следовать вычетом налога на добавленную стоимость.СНГ 20Antonibutgoogle