Menu

Ai SolventVap 5L Evaporator w/ Cold Trap Condenser & Power Lift

The new Ai SolventVap 5L series rotary evaporators is now ETL tested to UL/CSA standards (optional). This certification is required by many municipalities, and it also provides a higher standard of equipment safety and lifespan. SolventVap come with all PTFE valves for solvent-resistant operations. Also come with them are vertical glassware and digital temperature/rotation control. Its optimized bath volume allows for rapid heat-up times. That’s why our SolventVap evaporators consistently deliver reliable and reproducible process results that are usually reserved for more costly systems. Another important aspect of the SolventVap is the safety features, which includes dry-run protection, water bath over-temperature shut-off protection, and fuse protection.

Rotary evaporator features a specially designed motor and worm gear, which provides constant rotation at speeds from 10 to 180 rpm. As the flask containing the solvent is rotated, it continually transfers a thin layer of liquid over the entire inner surface. This gives a very large surface area for evaporation, which is caused by the gentle heating from the water bath. The rotating system is fitted with a special seal that allows the apparatus to be placed under vacuum, effectively reducing the boiling point of the solvents and removing the vapor phase, making the process much more efficient. Each unit is also equipped with an easy-to-use vacuum release and a continuous feed system, which allows solvent to be constantly drawn into the rotating flask without needing to stop the operation.

Digital water bath operates from ambient temperature to 99°C (210°F) with PID temperature control stepping at 0.1°C increments. Heating coils are located directly inside the pan for the most efficient heating possible. A built-in overheat protector will shut down power, should the controller fail.

Standard Glassware Set includes 1.32 gallon (5 liters) round-bottomed evaporating flask, 0.79 gallon (3 liters) round-bottomed receiving flask, and vertical cold trap condenser. Rotary evaporators with vertical condenser for are great for distillation of solvents with higher boiling points.

Features

UL 61010-1 and CSA C22.2 certified (optional)

No chiller needed, utilizes dry ice for optimal efficiency.

Solvent-resistant PTFE and Viton gaskets, ensuring long time operation.

Specialized motor with extremely compact, intermeshed worm and worm gear provides precise driving for very quiet, vibration-free operation.

Downward-condensing vacuum connection design ensures safe vacuum operation.

Motorized water bath lifting for precise control.

Easy, straight-forward visual operation with digital speed and temperature display.

PID temperature controller ensures accurate temperature control is maintained.

One year warranty on rotary evaporator except for glassware and all sealing gaskets.

Your safety is important to us! Please use caution when operating. Users of glass reaction equipment must take all necessary precautions to avoid contact with rotating parts, particularly entanglement of loose clothing, hair, necklaces, or other jewelry. Under these circumstances, the winding action of the rotating parts can draw the user(s) into the apparatus, resulting in breakage of glassware, burns, and/or chemical exposure. Extra caution must also be taken when operating with air-reactive materials, especially under vacuum. A leak can draw air into the apparatus and cause a violent reaction to occur.

Specifications

 Electrical requirements
 110V 60Hz single phase, 2300 watts, 21A
   or
 220V 50/60Hz single phase, 2300 watts, 10.5A
 Rotation motor: 300 watts

 Glass material High borosilicate glass 3.3

 Evaporating flask
 Capacity: 1.32 gallon (5 liters)
 Maximum load: Not to exceed 60% of the flask's capacity
 Sealing flange: 2" diameter
 Rotation speed: 10 to 140 rpm
 Evaporating speed: 0.5 gallon/hour (water), 1 gallon/hour (alcohol)

 Receiving flask
 0.79 gallon (3 liter)

 Condenser Glassware: Vertical cold trap (dry ice) condenser with lid
 Vacuum connection: 3/8" hose barb x 1

 Working environment
 5 to 95°F

 Water bath
 Temperature range: ambient to 99°C (210°F)
 Temperature controller: digital
 Dimensions: 11.4" diameter x 6.7" depth x 9" height
 Material: stainless steel
 Media: distilled water only
 Max. water level: not to exceed 1" from the top rim of the bath
 Number of heaters: one
 Drain port: one
 Exterior liner: rubber
 Lifting: motoriezed
 Maximum lifting distance: 4 inches

 Vacuum
 Vacuum level: < 3 torrs
 Sealing: PTFE + Viton gaskets
 Connection: 3/8" hose barb x 1

 Safety Dry-run, over-temp shut-off, built-in circuit breakers

 Shipping weight 105 Lb (evaporator), 57 Lb (glassware)

 Unit dimensions
 30 x 15.7 x 42" (WxDxH)

 Shipping dimensions 29 x 17 x 35" (evaporator), 22 x 22 x 22" (glassware) (WxDxH)

 Compliance UL 61010-1: 2012 Ed.3 + R: 29 Apr 2016
 CSA C22.2# 61010-1-12: 2012 Ed.3+ U1; U2 (R2017)

No Reviews Yet

Be the first!

Customer Reviews

No Reviews Yet

Be the first!

Have You Used This Product?

Harvest Headquarters & Glass Gallery

Born in Humboldt