Cascade CVO-2 STANDARD Package

Cascade’s CVO-2 STANDARD Complete Vacuum Purge / Drying Package
The CVO-2 STANDARD Package is a 2 cubic foot, benchtop vacuum oven paired with a clean, oil-free scroll pump. This package is an ideal benchtop set up for vacuum drying or purging temp sensitive material requiring a steady, gentle, non-turbulent purge. This complete system will liberate solvents, water or other unwanted compounds in a small batch, R&D, laboratory environments.

Processing Temperature Sensitive Material? The CVO-2 comes in both low temp & high temp versions.

Be sure to get the low temp CVO-2 version that has excellent temperature uniformity for temperature sensitive products such as pharmaceuticals, slurries or any product that can be damaged or destroyed by temperature fluctuations.

Low Temperature Processing Range:  26°F to 250°F (121°C)
Temperature Uniformity: +/- 1.5°F @ 105°F (40.5°C)
Temperature Stability: +/- 0.4°F @ 105°F(40.5°C)

High Temperature Processing Range:  Up to  428°F / 220°C
Temperature Uniformity: +/- 6.5% of setpoint

At time of order we will verify the high / low temp version best suited to your requirements.

Both oven and pump can run off a single dedicated 120V / 1ph / 20 AMP circuit.

CVO-2 STANDARD Package Includes:

Cascade Sciences CVO-2 vacuum oven

5 stackable, flexible aluminum shelves in 1″, 2″ and 3″ heights

Agilent IDP3, 2.1CFM dry scroll pump

Vacuum oven to pump connection kit. 3/8th diameter vacuum rated tubing and KF hardware.

CVO-2 Vacuum Oven Features

NRTL Certified by TUV

Flexible shelving configuration of 5 each 11.5″ x 19″  stackable shelves

Stable temperature control. Digital temperature readout with temp sensor INSIDE the oven

Solvent resistant BUNA door gasket

Bright LED lights in window for visibility of sensitive material

Digital vacuum gauge reads in inches of mercury

Smooth, quarter-turn vacuum and vent valves

Rear KF-25 port allows for rapid MAX EVAP purging or running feedthroughs inside oven for monitoring

120V or 220V power options are available

Quality Tempered Rated Glass NGI-US to ANSI Z97.1.2007  156CFR/201 11  SGCC -2577 ½ UA

Adjustable leveling feet insure your unit sits solid and level in the workspace

Agilent IDP3 Dry Scroll Pump Features

Oil-Free. Eliminates contamination risk.  Will not smoke out exhaust, no filter required.

Quiet (for a vacuum pump)

2.1 CFM pumping speed

Ultimate vacuum: 2.5 x10-1 torr

120V / 1ph power

Adjustable “gas ballast” allows for better solvent tolerance / ingestion

Maintenance requires the replacement of a single “tip seal”.  Low cost of ownership.

Free Shipping Note: When ordering online, shipping is free!
The CVO-2 STANDARD Package is shipped as heavy freight. Delivery to residences or no-forklift locations can add up to $120 for liftgate services. At time of order, Cascade will contact you to arrange your specific delivery requirements.

Model CVO-2 (CVO-2) Specifications

All shelves are adjustable, but not removable.

Volume: 1.67 Cubic Ft. | 47.2 Cubic Liters
Interior: 2”W x 20”D x 12”H | 305mm x 508mm x 305mm
Exterior: 18.8” W x 24.5” D x 24.5”H | 478mm x 622mm x 622mm

Temperature Range

Low Temperature Processing Range:  26°F to 250°F (121°C)
Temperature Uniformity: +/- 1.5°F @ 105°F (40.5°C)
Temperature Stability: +/- 0.4°F @ 105°F(40.5°C)

High Temperature Processing Range:  Up to  428°F / 220°C
Temperature Uniformity: +/- 6.5% of setpoint
Ambient laboratory conditions can affect temp performance

Vacuum Valve: ¼ Turn Lever
Vent Valve: ¼ Turn Lever
Interior Lighting: LED Strips (Rated to 150C)

Glass Window: Tempered NGI-US to ANSI Z97.1.2007

Vacuum Gauge: Digital. 0 to 29.9”Hg | Reads in mmHg, bar psi, kPa, cm2, mmH20

Temperature Controller

Digital Set Point
Accurate Within 1°F
Independent Overtemp Failsafe

Ports(Rear)

Vacuum = 3/8th Barb
Vent = ¼” Barb
Auxiliary KF-25 Port
Data: Log temp & vacuum levels

Inert Gas Introduction

Yes. Via ¼” Vent Barb
15 psi max inlet pressure

Power Options

110V – 120V / 1ph / 6A  50/60Hz
Cord Included
NEMA 5-15 Power Outlet
Full Power 2456 BTU/hr

220V – 240V / 1ph / 4A 50/60Hz
Cord Included
NEMA 6-15R Power Outlet
Full Power 3275 BTU/hr

Shelves

Stackable. Removable
1” High = 1 each
2” High = 2 each
3” high = 2 each

Gaskets

12” x 12”

Solvent Resistant BUNA Standard
221°F to 105°C Rated
High Temp Silicone – Optional
Rated to 446°F to 230°C
Viton – Optional
Rated to 401°F to 205°C

Weight

:
148 lbs | 67.1 Kg
Shipping: 183 lbs | 83 Kg

Certifications

ISO 9001
NRTL TUV #U8 170464972 077
CAN/CSA-C22.2 No. 61010-1:2012
+ UPD No. 1:2015-07 + UPD No. 2:2016-04
CAN/CSA-C22.2 No. 61010-2-010:2015
UL 61010-1:2012/R:2016-04
UL 61010-2-010:2015
EN 61010-1:2010
EN 61010-2-010:2014

AGILENT IDP3 VACUUM PUMP

Oil-Free, Scroll Pump
2.1 CFM
120V | 1ph

Ultimate Pressure: 29.9 ”Hg | 2.5 x10-1 torr
Shipping Dimension: 33”L x 33”W x 47”H | Oven Class 85

Warranty: 1 Year | Gaskets not included

The CVO-2 VAC OVEN comes in both low temp and high temp versions. The low temp version has excellent temperature uniformity for temperature sensitive material. The higher temp version, 220°C has a uniformity about 6.5% of setpoint. At time of order we will verify the high / low temp version you require.