Ai 10°C to 25°C 33L/Min 35L Capacity Recirculating Chiller

Digital temperature controlled recirculating water chiller with built-in swivel casters, recommended for our IH series induction heaters. These chillers have built-in stainless steel tank, water pump and tubing for durability and rust-free operations. Water manifold included for immediate use.

Specifications

 Model
 WAC-4

 Controller Digital micro-chip controlled with LCD screen and fluid level display

 Input power 480VAC 60Hz three-phase (3PH) 3.75kW

 Nominal cooling capacity 10366 kcal per hour

 Nominal cooling capacity is according to:
        Inlet chilled fluid temperature: 12°C
        Outlet chilled fluid temperature: 7°C
        Inlet cooling air temperature: 30°C
        Outlet cooling air temperature: 35°C

 Compressor
 Make: Danfoss (UL Listed)
 Power: 460V 3-60Hz 8A 3750 watts, LR 25A, thermally protected
 Refrigerant: R407C (2,400g)
 PS: 22.6 bar, TS max: 50°C, TS min: -35°C
 Number of compressors installed: one

 Water pump
 Make: LX (CMF2-50T-A-W-G-BABE)
 Power: 480V 60Hz 3-PH 550 watts 2.5/Y1.4A 3450 rpm IP55
 Max liquid temperature: 70°C
 Pumping speed: 33L per minute
 Max pressure: 10 bar. H(max): 64m, H(n): 51m

 Reservoir capacity 35L

 Recommended coolant Distilled water

 Cooling fan Make: Weiguang (YWF4D-350S-102/34-G)
 Power: 480V 60Hz 80/150 watts 0.27A 1640 rpm
 Number of fans installed: two
 Flow rate: 142,000 cu ft per hour

 Temperature accuracy +/- 2 °C

 Water inlet & outlet on chiller
 KF40 flange

 Water manifold Inlet: KF40 flange, outlet: 8mm quick connect with ball valve

 Unit/shipping weight 375 Lb / 485 Lb

 Unit/shipping dimensions 41 x 22 x 54" / 50 x 25 x 61" (DxWxH)

 Safety Over current, compressor delay start, water pump
 over load, built-in fuse, over-voltage and under-
 voltage, abnormal operations, phase protection and

 Working environment Temperature range of chilled fluid: 5°C - 35°C. Temperature
 difference of chilled fluid between inlet and outlet: 3°C - 8°C.
 It is better to use the chiller while the ambient temperature is
 at or below 35°C

 Recommended to use with
 these induction heaters
 (result may vary on
 different applications)
 High frequency 10kW, 20kW, 30kW
 Mid frequency 25kW, 35kW
 Low frequency 25kW, 35kW

 CE compliant Yes