Ai -80°C 10L Recirculating Chiller with 30L/Min Centrifugal Pump

The re-designed Ai C80-10 series recirculating chillers are the true thermostatic control laboratory chiller, these closed laboratory chillers are ideal for applications such as cooling rotary evaporators, analytical instrumentation, laser etching, ICP, vacuum systems, plasma etching and jacketed reactors. This system can also be used as a replacement to tap water cooling in laboratory applications.

Ai C80-10 are compressor-based recirculating chillers that offer outstanding performance and high reliability as well as quiet operation and ease-of-use. Powerful force/suction pump provides constant flow rates, while microprocessor PID controller gives you the ideal solution when you need precise temperature control or cooling below ambient temperature.

IMPORTANT! -80°C ULTIMATE TEMPERATURES ARE TESTED UNDER EMPTY LOAD CONDITION (NO ROTARY EVAPORATORS OR JACKETED REACTORS ATTACHED).

C80-10 circulating chiller features

No dry ice or liquid nitrogen needed

Advanced PID digital temp controller

Built-in chilling fluid filter protects the recirculating pump and prevent blockage

All steel construction for durability

Cost saving as the water consumption is completely eliminated

Built-in casters for mobility

Plug and play, no assembly required

Specifications

 Model C80-10

 Electrical requirements
 220V 60Hz 1-PH 22A, 4750 watts

 Compressor Make: KK
 Power: 208-230V 60Hz 1-Phase
 Number of compressor: two
 Refrigerant: R404A (2680g) and R23 (710g)

 Cooling capacity (assuming
 working environment is
 25°C or 77°F)
 @ -40°C:       2000W
 @ -50°C:       1500W
 @ -60°C:       1000W
 @ -75°C:       280W
 @ -78°C:       180W

 Reservoir
 Capacity: 10 liters or 2.6 gallons
 Dimensions: 17.5 x 7 x 8.5 inches (LxWxH)
 Material: Type 304 stainless steel
 Chilling fluid connection: 1/2" NPT
 Drain port: 3/8" barb

 Recirculating pump Pump type: Centrifugal
 Model: 25PLBR30-10
 Pumping speed: 8 gallon/min or 30L/min
 Power: 280W
 Pressure: 1 bar

 Radiator Fan motor
    Make: Boyoung
    Model: YWF 4E-350
    Power: 220V 60Hz 0.8A 180W
    Rotation speed: 1600rpm
    Flow rate: 2500 m2/hour
 Cleaning
    Clean radiator fins with a fin comb every three months

 Working environment
 Temperature: 5°C to 35°C
 Humidity: < 70%

 Temperature controller Temperature range: -80°C to -40°C
 Accuracy: +/- 2°C
 Type: Digital microprocessor PID controlled
 Display unit: Fahrenheit °F

 Tempeature sensor type Pt100

 Housing Powder coated type 42 stainless steel

 Built-in swivel casters
 Four

 Safety Compressor over-heat protection
 Short circuit and ground protection
 Over-current protection
 Over-voltage protection
 Over-heat protection

 Unit/shipping weight 515 lbs / 615 lbs

 Unit/shipping dimensions 38.5 x 25 x 52 inches / 44 x 30 x 64 inches (DxWxH)

 Recommended for
 50L to 100L rotary evaporators, or 50L jackted reactors